After 20 years of living in his home, this customer in Long Branch, NJ, decided it was time to sell it. The only thing stopping him was the massive amount of mold growth throughout the attic. So he called Mold Solutions for help and we were sent out.

Attics provide an ideal environment for mold since they contain plenty of food sources such as wood and insulation. First, we treated the entire attic with our EPA registered antimicrobial called MAPS 1, which stands for Mold Abatement Polymer Solutions. MAPS 1 attacks mold on a cellular level and kills it immediately. Afterward, we used our mold stain remover and scrubbed away all the excess mold staining throughout the attic.

Lastly, we treated every square inch of the attic with our patented sealant called MAPS 2. This application encapsulates the surface mold is growing on and renders it harmless, inert, and non-allergenic. MAPS 2 is also moisture-sensitive and will reactivate whenever it gets wet to prevent future mold growth!

A homeowner in Long Branch, NJ, had a roof leak that had gone undetected for quite awhile. Once discovered, they had the roof leak repaired by a qualified roofer. However, as often happens with roof leaks, the intruding water caused mold growth. Here, mold had started to grow in a closet. The homeowners contacted Mold Solutions by Cowleys to resolve the mold problem.

A two-member crew arrived to treat the mold-affected areas. We treated the area with an EPA-registered antimicrobial (MAPS 1) followed by a patented sealant (MAPS 2). This sealant not only kills the current mold growth but is moisture-sensitive and will reactivate to kill any future mold growth in the areas where it is applied.  Finally, we wiped down any visible staining. Mold stains are a by-product of the mold enzymes consuming organic materials. While some mold stains can be removed, others are too deep in the building materials to be superficially scrubbed away. In those cases, the homeowner must either replace the materials or paint over the stains. 

With this mold job, as with most of our projects, there was no loss of structural integrity to the building materials. In these situations, we treat the mold directly and leave the building materials alone. We finished this project in less than a day. The homeowner was quite pleased with our mold treatment process. We made his home mold-free without the time, expense, and disruption of a tear-out/renovation project.