Mold growth in a home is a symptom of an underlying water or moisture problem. Mold can rear its head anywhere and everywhere. Like all living organisms, mold needs air, organic material as a food source, the right temperature, and water or moisture in order to grow. We often think of water and moisture problems as external problems where water intrudes into the home from the outside, such as from flooding or a cracked foundation allowing water seepage from water-saturated soil. But oftentimes, the problems are internal. There are building or repair issues responsible for water accumulation. Common problems are burst or leaky pipes, non-operational sump pumps, backed-up gutters, and a variety of condensation problems from poor building design. Condensation easily forms on cold metal pipes and cold concrete floors as well as from our everyday activities that release moisture including cooking, washing clothes, and bathing. It is no surprise that often mold grows and thrives in crawl spaces, basements, attics, kitchens, washer/dryer areas, and bathrooms. 

One of the most important ways of reducing condensation in our living spaces is through proper ventilation. A well-ventilated home is essential for removing moisture, especially in our bathrooms and kitchens where large quantities of steam permeate the air from hot water. Homes often have vent fans installed in bathrooms to carry away moist air. Proper building construction dictates that vent fans, whether bathroom vents or dryer vents, be vented directly outdoors. Venting exhaust fans into the attic is asking for trouble, even if the attic itself is vented. The excess moisture can cause condensation on the rafters and sheathing, which can lead to wood rot, moisture-saturated insulation, and dangerous mold growth. This homeowner in Kendall Park learned this lesson the hard way. The installer had vented the bathroom fan into the attic rather than outside, and, sure enough, he found himself with a serious mold problem overhead. 

For the long-term, the homeowner should fix the venting problem to remove the underlying condition allowing mold growth. However, Mold Solutions by Cowleys resolved the immediate problem. In less than a day, we applied a powerful anti-microbial to kill the mold, and then applied a patented, proprietary sealant containing silver micro-particles. Cowleys is an authorized applicator of this unique sealant; you can’t get it just anywhere. This sealant kills the mold at the cellular level rendering it inert and harmless so it no longer poses a health risk. However, this sealant does much more. It reactivates with moisture to prevent any regrowth of mold, so it not only kills today’s mold growth but tomorrow’s as well. 

With this project, there was no removal of building materials, no need for home renovation, and no need for the family to relocate. While the homeowner was disappointed that the vent had to be properly reinstalled, he was pleased with Cowleys for taking care of the mold problem so quickly. This project was one of our many successful mold treatment projects — we removed the threat of mold while saving the homeowner the expense and inconvenience of a major renovation that often follows the tear-out of building materials by traditional mold remediators.